ADLINK Technology MCM-100, User Manual

Page: 35 / 117

Getting Started 19
MCM-100/102
2 Getting Started
2.1 Unpacking Checklist
Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform your
dealer immediately. Retain the shipping carton and packing
materials for inspection. Obtain authorization from your dealer
before returning any product to ADLINK. Ensure that the fol-
lowing items are included in the package.

MCM-100/102 unit

DIN rail brackets

Wall mounting kit

Screw pack for DIN rail, wall mounting, and storage fixing

Quick Start Guide
2.2 Connecting DC Power
Active DC power sources must comply with LPS and SELV cir-
cuits with no energy hazard, as well as the following.

IEC 60950-1:2005+A1:2009+A2: 2013

Output voltage: 6 to 36VDC

Output current: 4.2 to 0.7A minimum

Tma: 50°C min.
The DC power input connector of the MCM-100/102 utilizes V+, V-
and chassis ground pins, and accepts input voltage as shown pre-
viously.
2.3 DIN Rail Mounting
The MCM-100/102 controller is shipped with wall-mounting brack-
ets and accessory screws, with mounting procedures as follows.
1. Prepare the DIN rail mounting bracket and 2 M4-F head
screws.
WARNING:
Before providing DC power to the MCM-100/102, ensure the
voltage and polarity provided are compatible with the DC input.
Improper input voltage and/or polarity can be responsible for
system damage.