ADLINK Technology Matrix MXE-5000 Series, User Manual

Page: 18 / 56

8 System Description
Matrix MXE-5000 Series
User’s Manual
2.2.4 USB 2.0 Connectors
The MXE-5104M controller provides six USB 2.0 Type A ports on
the front panel. All USB ports are compatible with high-speed, full-
speed and low-speed USB devices. The MXE-5104M controller
supports multiple boot devices, including USB flash drive, USB
external hard drive, USB floppy, USB CD-ROM and others. The
boot priority and boot device can be configured in BIOS. Please
refer to Section 4.1.5 for details.
2.2.5 DVI connector
The DVI connector connects the MXE-5104M controller to a DVI
interface monitor.
2.3 Rear Panel I/O Connectors
The MXE-5104M controller provides a standard-use I/O connector
configuration on the rear panel. The entire MXE-5104M controller
features DC power input connector, four D-sub 9P connectors
COM1 through COM4, and four Gigabit Ethernet RJ45 connec-
tors, LAN1 through LAN4.
LED indicator Color Description
Watchdog (WD) Yellow Indicates the status of the watch-
dog timer. When the watchdog
timer is started, the LED flashes.
When the timer finishes, the LED
is continuously lit.
Hard disk drive (HD) Red Indicates the operating state of
HDD. When the SATA hard drive
or CF card is active, the LED
indicator flashes.
Stand by Green Indicates standby status. When
the plug is received in the DC
power jack, the LED lights con-
tinuously.
Table 2-1: LED Indicators