ADLINK Technology HDV62, User Manual

Page: 50 / 164

Function Library 39
4.4.2 Sensor Format
Purpose
These functions set or get image format of source input. The for-
mat is different according to the channel of input.
Prototype

C/C++
int Hdv62_SetSensorFormat (UINT Number, UINT Format)
int Hdv62_GetSensorFormat (UINT Number, UINT
&Format)
 C#
int SetSensorFormat (uint Number, uint Format)
int GetSensorFormat (uint Number, out uint Format)
 VB.Net
SetSensorFormat (ByVal Number as UInteger, ByVal
Format as UInteger) As Integer
GetSensorFormat (ByVal Number as UInteger, ByRef
Format as UInteger) As Integer
Parameters
 Number
The number of device. The allowed value is from 0 to 15.
 Format
The format of source input. Following are possible values
fort different channel:
 Channel 0
Analog RGB signal from DVI-I connector
 0: VGA 60 fps (640 x 480),
 1: SVGA 60 fps (800 x 600),
 2: XVGA 60 fps (1024 x 768),
 3: SXVGA 60 fps (1280 x 1024),