ADLINK Technology Express-KL2, User Manual

Page: 75 / 96

Express-KL2
BIOS Setup
69
7.4. Boot
7.4.1. Boot Configuration
Feature Options Description
Boot Configuration Info only
Setup Prompt Timeout
1
Enable/Disable the onboard SATA controllers.
Bootup NumLock State
On
Select SATA controller mode.
Quiet Boot Disabled
Enabled
Enable/Disable the PATA port. In fact this enables or
disables the SATA channel on which the onboard
SATA to PATA converter is attached. When set to
enabled the system boot will be delayed for the time
specified in PATA Port Detection Timeout if no PATA
device is connected.
Auto: Scan for PATA device and enable per default.
CSM Configuration Submenu
Fast Boot
Disabled
Enabled
Define the maximum time to wait for drive detection on
PATA port.
New Boot Option Policy
Default
Place First
Place Last
Enables or disables boot with initialization of a minimal
set of devices required to launch active boot option.
Has no effect for BBS boot options.
Boot Option Priorities Info only
7.4.1.1. CSM Configuration
Feature Options Description
CSM Support
Enabled
Disable
This option controls if CSM will be launched.
CSM16 Module Version Info only
GateA20 Active
Upon Request
Always
UPON REQUEST - GA20 can be disabled using BIOS
services. ALWAYS - do not allow disabling GA20; this
option is useful when any RT code is executed above
1MB.
Option ROM Messages
Force BIOS
Keep Current
Set display mode for Option ROM.
INT19 Trap Response
Immediate
Postponed
BIOS reaction on INT19 trapping by Option ROM:
IMMEDIATE - execute the trap right away; POSTPONED
- execute the trap during legacy boot.
Boot Option filter
UEFI and Legacy
Legacy only
UEFI only
This option controls what devices system can to boot.
Option ROM execution Info only
Network
Do not launch
Legacy only
UEFI only
Controls the execution of UEFI and Legacy PXE OpROM.
Storage Do not launch
UEFI only
Legacy only
Controls the execution of UEFI and Legacy Storage
OpROM.