ADLINK Technology EOS-JNX-G, User Manual, Page: 44 / 53

34 Getting Started
2.5 Wall Mount (Optional)
An optional wall mount kit is available for the EOS-JNX. Refer to
the product datasheet or website for ordering information. Follow
the steps below to mount the device to a wall.
1. Attach the brackets to a wall (or other suitable mounting
surface) so that their keyhole-shaped mounting holes
are oriented with the wider openings at the top.
2. Secure the four M4 screws to the bottom of the chassis.
3. Securely attach the device to the wall-mount brackets by
first inserting the heads of the screws into the wider
openings of the bracket’s mounting holes, then sliding
the device down so that the screws are firmly held by the
narrower portions of the mounting holes.
Figure 2-8: Wall Mounting
M4 x5mm screw