ADLINK Technology EOS-JNX-G, User Manual, Page: 18 / 53

8 Introduction
EOS-JNX Series Rear Panel
Figure 1-6: Rear Panel I/O Connectors
Table 1-3: Rear Panel I/O Connectors
Item Name Description
N Wafer Connector For system image flashing or debugging via jumpers
O microSD Slot OS boot storage. (Preinstalled 64G microSD card)
P Micro USB Port Connect to client for system image flashing.
Q PoE Switch
PoE initial mode setup switch
On
(default)
• EOS-JNX-G enables PoE after user presses the
Power button
• EOS-JNX-I enables PoE when DC power is on
Off
• Initial PoE status of both models is disabled and
PoE On/Off status is controlled by the AVS SDK.
N O P Q