ADLINK Technology DLAP-4000 Series, User Manual, Page: 35 / 91

System Layout 25
DLAP-4000
3.2.5 Clear CMOS (CLCMOS1)
Upon encountering an abnormal condition preventing the DLAP-
4000 from booting, the jumper can clear the BIOS content stored
in CMOS and restore default settings. To clear CMOS, short pin
#2 to pin #3 for a minimum of 3 seconds, and then remove the
jumper to return to normal mode (replace to pins #1 and #2,
default).
Table 3-11: Clear CMOS (CLCMOS1)
CLCMOS1 Clear CMOS
1-2 Normal (default)
2-3 Clear CMOS