44
Cooling System
2. Pull the fan module out, disconnect the power cable, and
replace with a functional fan module.
Figure 4-5: Disconnect the rear exhaust fan module (PSU) power cable
3. Reverse steps 1-2 to replace the fan module. Ensure the
power cable is properly placed in the cut-out on the fan
casing to prevent it from catching during installation.
Left-Side Exhaust Fan
1. Remove the 4 screws attaching the left-side exhaust fan
module as shown below.
Summary of Contents for cPCIS-6418U Series
