ADLINK Technology cPCI-3620 Series, User Manual

Page: 17 / 102

Introduction 5
cPCI-3620
1.4 Package Contents
The cPCI-3620 is packaged with the following components. If any
of the following items are missing or damaged, retain the shipping
carton and packing material and contact the dealer for inspection.
Please obtain authorization before returning any product to
ADLINK. The packing contents of cPCI-3620 Series non-standard
configurations will vary depending on customer requests.
Processor Blade
X The cPCI-3620 Series Processor Blade
Z CPU and memory specifications will differ depending on
options selected
Z Thermal module is assembled on the board
X Y-cable for PS/2 combo port (8HP version only)
X 2.5" SATA drive accessory pack (8HP version only)
Rear Transition Module
X cPCI-R3610: 8HP width, 50mm depth Rear Transition Mod-
ule with 2x COM, 1x USB 2.0, 2x GbE, 1x SATA, 1x VGA
X cPCI-R3610T: 8HP width, 80mm depth Rear Transition
Module with 2x COM, 1x USB 2.0, 2x GbE, 1x SATA, 1x
VGA
NOTE:
NOTE:
The contents of non-standard cPCI-3620 configurations may
vary depending on the customer’s requirements.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.