ADLINK Technology AVA-5500 Series Page 49 User Manual Download

Page: 49 / 79

Interfaces

AVA-5500

4.2

Status LEDs

Table 4-16: Status LED Definitions

LED indicator

Color

Description

SATA Drive

Red

When blinking, indicates the SATA drive is
active.

Watchdog (WD)

Amber

Indicates watchdog timer status. When
watchdog timer starts, the LED flashes.
When the timer is expired, the system will
auto reboot.

Diagnostic

Green

If lit continuously, indicates no physical
storage is connected.
If blinking, indicates no memory is installed
on either SO-DIMM socket.

White

Programmable LED: user defined.
Controlled by GPP_A21 on PCH.

White

Programmable LED: user defined.
Controlled by GPP_A22 on PCH.

White

Programmable LED: user defined.
Controlled by GPP_A23 on PCH.

Summary of Contents for AVA-5500 Series
















































































Search results

Summary of Contents for AVA-5500 Series

Reviews:

Related manuals for AVA-5500 Series

Brands by name

Popular brands

ADLINK Technology AVA-5500 Series, User Manual

Search results

Summary of Contents for AVA-5500 Series

Reviews:

Related manuals for AVA-5500 Series

Brands by name

Popular brands