ADLINK Technology AdvancedMC AMC-8100, User Manual

Page: 34 / 76

20 Fibre Channel Firmware Installation
3. Boot the system to the DOS prompt A:\>.
4. Execute the MPTUtil program directly from the DOS
command line by typing at the prompt:
A:\ MPTutil
The MPTUtil program identifies all LSI based host adapt-
ers in the system, and allows you to select which adapter
to update (see figure below).
Figure 4-4: MPTUtil Device Selection
5. The MPTUtil program displays a menu of options (see
figure below). To update the firmware, select option
a - Update Firmware
.