Adler Europe AD 7412, User Manual

Page: 5 / 80

5
basin with water.
17. If the device uses a power supply, do not cover it, as it could lead to a dangerous increase
in temperature and damage to the device. Always, first insert the plug into the power socket in
the device and then the power supply to the mains socket.
18. Do not use the bed sheet in folded condition. Do not put pins, needles and other metal
objects in the sheet.
19. Do not use the sheet if it is wet or damp. Leave the sheet hung loosely in a ventilated
area until it is completely dry.
20. Do not put the power cord on a warmed sheet. Do not fold the product, it should be
placed on top when stored, and not cover the product with other heavy objects. Check the
product periodically for signs of wear or damage. If such signs or product are used
improperly, please contact your supplier before continuing to use it.
21. Store in a dry place. Never put heavy objects on the sheet.
22. Never go to sleep with the electric sheet turned on. Unplug the power plug from the outlet.
23. Never cover the controller.
24. Before switching on the electric sheet, make sure that it is evenly distributed, there are no
kinks or folds.
25. The parts of the product indicated in the Cleaning chapter can be washed in a washing
machine at 30 ° C.
26. Do not iron the product, except for the parts of the product indicated in the Cleaning
chapter.
27. This product is not intended for medical use in hospitals.
28. The product should cool down before storage.
29. The product may be used only with the types of removable elements specified in the
product’s marking.
30. Do not use the device on adjustable beds or if the device is used on an adjustable bed,
check that the product and cord cannot get stuck or corrugated, eg on hinges.
31. The device is equipped with a fuse protecting against overheating, which should not work
when used in accordance with the intended use of the equipment. If the fuse trips, the device
will stop working, the equipment must be returned to the manufacturer or its representative
for repair.
SYMBOL EXPLANATION (picture 2)
1. Read the instructions for use.
2. Do not bleach.
5. Do not dry clean.
6. Do not insert pins.
8. Do not use folded or rucked.
9. Not to be used by very young children (0-3 years).
11. ONLY the internal removable synthetic wool lining can be hand washed in water. Recommended water temperature 30°C.
12. Can be tumbled dried at low temperature.
13. Only parts of the product indicated in the instructions can be ironed at a temperature of up to 110°C.
14. Do not use the device near water, for example: in the shower, in the bathtub or above the basin with water.
BEFORE FIRST USE
1.The product needs to be unfolded and laid flat before switching on. On initial use the heating pad may smell of synthetic material.
However, this odor will disappear after a short while.
2.We recommend that you switch your product to the maximum setting for 30 minutes before bedtime then reduce to your desired heat
setting. You must switch OFF prior to sleeping.
3. Always use the heating pad with the cloth cover with zipper (2), even if you are using essential oils or ointments; this is necessary to
avoid damage to an inside synthetic cover (4).
DESCRIPTION OF THE DEVICE
1. Controller
2. Removable pillowcase with zipper
3. Pocket to heat up hands 4. Inside synthetic cover
5. Zipper 6. Power switch
7. Heating button (1-8 levels) 8. Timer button