A.D.J. Supply Europe B.V.
– www.americandj.eu – Mega QPlus Go Instruction Manual Page 9
OPERATING INSTRUCTIONS
System Menu: The display will lock after 30 seconds, press the MODE button for 3 seconds to unlock.
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE button until “don” is displayed, press the
UP button to display “doff”. Now the display will disappear after 10s. Press any button to turn the display on
again. Be advised though that the display will turn off automatically after 10 seconds.
To set the display press the MODE button until “dXX” is displayed. Use the UP or DOWN buttons to select either:
“don” = LED display on at all times.
“doFF” = LED display shuts off after 10 seconds.
LED Display Inversion:
Follow these instructions to flip the display 180° so that the display can be read upside down.
1. Plug the fixture in and press the MODE button until “dXX” is displayed
.
“XX” represents either “on” or “oFF”.
2. Press the SET UP button until “Stnd” is displayed.
3. Press the UP or DOWN buttons to reverse the display 180°.
Energy Saving Mode:
1. Plug the fixture in and press the MODE button until “bXXX” is displayed
.
“XX” represents the current battery
life.
2. Press the SET UP button so that “bSXX” is displayed.
3. Press the UP or DOWN buttons to turn eneryg saving mode either “On” or “Off”.
Operating Modes:
The Mega QPlus GO has five operating modes:
• RGB+UV Dimmer Mode - Choose one of the four colors to remain static or adjust the intensity of each color to
make your desired color.
• Sound-Active mode - The unit will react to sound, chasing through the built in programs. There are 16 sound
active modes.
• Auto Run Mode - In Auto Run mode, you can choose 1 of 16 color change modes, 1 of 16 color fade modes,
or a combo color change & fade mode.
• Static Color Mode - There are 64 colors to choose from.
• DMX control mode - This function will allow you to control each individual fixtures traits with a standard DMX
512 controller.
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tailored to their
own individual needs. This function also allows you to use your fixtures as spot lights. The Mega QPlus GO has
8 DMX modes: 1 channel mode, 2 channel mode, 3 channel mode, 4 channel mode, 5 channel mode, 6 channel
mode, 7 channel mode, and 8 channel mode. See pages 11-14
for each mode’s DMX traits.
1. This function will allow you t
o control each individual fixture’s traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until “d.XXX” is displayed. “XXX” represents the
current displayed DMX address. Use the UP or DOWN buttons to select your desired DMX address, then press
the SETUP button to select your DMX Channel mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel modes. The Channel modes are listed
below:
• To run the 1 Channel Mode, press the MODE button until “Ch01” is displayed. This is the 1 Channel DMX
Mode.
• To run the 2 Channel Mode, press the MODE button until “Ch02” is displayed. This is the 2 Channel DMX
Mode.
• To run the 3 Channel Mode, press the MODE button until “Ch03” is displayed. This is the 3 Channel DMX
Mode.
• To run the 4 Channel Mode, press the MODE button until “Ch04” is displayed. This is the 4 Channel DMX
Mode.
OPERATING INSTRUCTIONS (continued)