Twist to
adjust focus
WATER EFFECT PROJECTOR – SETUP INSTRUCTIONS
**
Keep all packaging materials. Projector must be returned in same case.**
PLEASE HANDLE WITH CARE – PROJECTORS ARE FRAGILE!
BASIC SETUP:
1.
Plug it in using power cord provided.
2.
Press and hold the "Master" button on the
display for 4 seconds to activate the menu
3.
Press "Master" button repeatedly until display
shows "Manual Mode." Then press "Enter."
4.
Press the Up or Down buttons until display
shows "Color." Then press "Enter."
5.
Press the Up or Down buttons to enter the number for your color:
WATER: 70
FIRE: 25
6.
Then press Enter.
7.
Place projector on a table and point at wall.
8.
Twist lens to adjust desired level of focus.
YOU’RE DONE!
ADVANCED SETUP:
Choose between 12 different colors OR color-changing mode
1.
COLOR CHANGE MODE:
a.
Press and hold the "Master" button on the display for 4 seconds then let go
b.
Press the "Master" button until display reads "Show Mode" then press "Enter"
c.
Use the up or down to switch between 3 different Shows then press "Enter"
d.
The light will rotate continuously through 6 different colors.
2.
OTHER COLORS:
a.
Follow steps 1-5 above and enter the color code from the chart below:
Color Chart
0 - 10 White
11 - 21 White & Orange
22 - 32 Orange
33 - 43 Orange & Green
44 - 54 Green
55 - 65 Green & Blue
66 - 76 Blue
77 - 87 Blue & Yellow
88 - 98 Yellow
99 - 109 Yellow & Purple
110 - 120 Purple
121 - 127 Purple & White
SETUP VIDEOS:
www.YouTube.com/RentMyWedding
PHONE:
1-800-465-8020
WEB:
www.RentMyWedding.com
