Adisa NEO FIRE 120, Technical Manual Of Installation, Use And Maintenance

Page: 20 / 77

NEO FIRE – Technical Manual
20
Symbol 'User' and the number to the right (access level 1 to 3) indicate which user level is
currently active.
1: Commissioning engineer
2: Heating engineer
3: OEM
Symbol 'Producer' indicates the main producer (e.g. oil/gas boiler, heat pump) that
is currently switched on.
The following symbol can be displayed in the work area:
The back arrow returns from the work area to the navigation bar.
Operating tips
Editing timeout 5 seconds
A changed setting reverts to the original state if not confirmed within
this period.
Long button
pressure
≥ 3 seconds
A long press of the knob on any expert view returns to the "Expert
view start page" (diagnostics page).
Locking timeout
1 minute
Certain plant states are displayed in the foreground, e.g. special
operations page. However, users are still able to go to any page and
set values. The foreground page returns after this period without
operator intervention.
Operating
timeout
8 minutes
The display switches automatically after this period without operation
to the start page on the operator unit or display in standby on the
room unit.
9.2 Programming
Turn the control knob on the navigation until “Service/setting pages” is preselected. Press the
control knob to enter to the pages.
The following is displayed on the service/setting pages:
Regional settings: Settings relating to the room/operator unit.
Special operation: Operating special functions.
Settings: Settings relating to the plant.
Expert: Login to expert view.