20
ADICOS M-BUSMASTER XF
420-2410-003 EN20
OPERATION
6.4 Checking Bus Communication
Once all of the devices have been started up and the central (host) computer and ADICOS
M-BUSMASTER XF have been switched on, the ADICOS central software can be opened.
The software enables each separate device to be integrated and checked using the central
computer. While the service PC is communicating with the connected detectors, the red LED
(reply) as well as the yellow LED (query) should be flashing.
7 Operation
During operation, the ADICOS M-BUSMASTER XF serves as the level converter from the
M-Bus system to a standard interface.
8 Maintenance
8.1 Cleaning
DANGER!
Risk of electric shock if not cleaned correctly!
ADICOS equipment works with electric current. Failure to clean the equipment
properly can lead to electric shock.
• Deenergize the entire detector system before cleaning the device!
The ADICOS M-BUSMASTER XF enclosure can be cleaned with a soft, damp cloth and dish
-
washing liquid. Scouring agents, acids and bases may not be used; do not apply water pres
-
sure to clean. Use caution to prevent water from penetrating the device. If is not cleaned
properly, the ADICOS M-BUSMASTER XF will not function as intended and can cause electric
shock.
8.2 Replacing
ADICOS M-BUSMASTER XF
WARNING!
Defective components can impair proper functioning. The equipment no longer
works as intended.
• If it is defective in any way, immediately replace the ADICOS M-BUSMASTER
XF.
8.2.1
Maintenance
The ADICOS M-BUSMASTER XF does not contain any wearing parts or consumables. So no
maintenance is required in this regard.
