14
ADICOS M-BUSMASTER XF
420-2410-003 EN20
DESCRIPTION OF PRODuCT
5.3 Mounting
DANGER!
ADICOS systems work with electrical current, which can cause equipment dam
-
age and fire if not installed properly.
• Deenergize the entire detector system before mounting the device!
• Mounting may be performed only by properly trained personnel.
CAUTION!
The ADICOS M-BUSMASTER XF is heavy. Incorrect mounting or the use of un
-
suitable wall mounts can result in injury.
• Mounting in a suitable location may be performed only by properly trained
personnel.
1
Select a suitable mounting location.
2
Secure the ADICOS M-BUSMASTER XF with suitable fittings. Consider the wall structure
and the thickness of the enclosure when choosing fittings (Chap. 10.1, »Dimensions«).
3
Connect the components to one another (Refer to Chap. 5.2, »Wiring Specifications«).
4
Connect the ADICOS M-BUSMASTER XF to the power supply.
5.3.3 Optional LAN Connection with Ethernet Card
The ADICOS M-BUSMASTER XF
can be ordered with an Ethernet card if needed. The addition
-
al board is in the slot and the internal connecting cables are attached before the device leaves
the factory. The LAN cable still has to be connected.
1
Pass the LAN cable through the cable duct. Do not crimp the cable until it has been drawn
through the cable duct.
2
Connect the crimped LAN cable to the LAN connection on the Ethernet card.
