ADIATEK coral 70s, Use And Maintenance, Page: 30 / 73

GB GB
PROGRAMMED MAINTENANCE
INTERVENTION DAILY 20 HOURS * 200 HOURS * 1000 HOURS *
RECOVERY TANK CLEANING
•
SUCTION FILTER CLEANING
•
SOLUTION TANK FILTER CLEANING
•
BRUSHES CLEANING
•
BRUSHES DISASSEMBLY AND CLEANING •
SQUEEGEE CLEANING
•
FRONT SQUEEGEE RUBBER REPLACEMENT
•
REAR SQUEEGEE RUBBER REPLACEMENT
•
SIDE RUBBERS REPLACEMENT
•
CHECK SQUEEGEE ADJUSTMENT
•
SQUEEGEE HOSE CLEANING
•
SOLUTION TANK CLEANING
•
CHECK BATTERIES ELECTROLYTE
•
CHECK OF THE BRAKE
•
TRACTION MOTOR CHECK
•
BRUSHES MOTOR CHECK
•
SUCTION MOTOR CHECK
•
CHECK BRUSHES BASE GROUP
•
SCREW TIGHTENING
•
* The hours refer to the ones indicated on the display (see under paragraph ”HOUR METER”).
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL CHARACTERISTICS
PPL (Polypropylene) Good wear resistance. Maintains characteristics with hot water up to 50°C. It is not hygroscopic.
NYLON Excellent wear resistance, even with hot water. It is hygroscopic.
TYNEX Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor or ruin the polishing.
BRISTLES THICKNESS Thicker bristles are more rigid and must be used on smooth floor or floor with small joints. On irregular floors with deep joints or
relieves, it is recommended to use softer bristles which penetrate more easily and deeper. Please be aware that when brush bristles
are worn out and therefore too small, they become rigid and unable to penetrate and clean deeper. This may also happen with
thicker bristles creating brush vibration.
MACHINE CODE QUANTITY DESCRIPTION USE
coral 70s
48906020 2 Cylindrical brush PPL 0,7 Ø 150 x 650 Smooth floors with small joints and persistent dirt.
48906060 2 Cylindrical brush PPL 1 Ø 150 x 650 Floors of resistant material and particularly dirty.
48906080 2 Cylindrical brush TYNEX Ø 150 x 650 Floors of resistant material and particularly dirty.
48906100 2 Cylindrical brush PPL 0,3 Ø 150 x 650 Smooth floors with small joints and persistent dirt.
30