EDM Serial-to-Ethernet Converters
User Guide ver. 2.0 | 2021-09-01
Phone: +420 538 890 720
10
E-mail: [email protected]
Configuring EDM Converter
The EDM106 converter can be configured in two ways: through the web interface and through the
console port (port RS-232).
Configuring Converter via Web Interface
Setting up a local connection in Windows 10
After connecting converter to a PC or LAN hub, it is necessary to configure the local connection. Perform
the following steps to change the network parameters:
1.
In Windows 10, click Start
Settings
Network and Internet.
2.
Enter Change adapter options.
3.
Right-click network adapter of the converter and then choose Properties.
Fig. 4. Menu "Change adapter options".
Fig. 5. Ethernet adapter properties.