ADF Web HD67948-2-A1, User Manual, Page: 20 / 30

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual NMEA 1083 / MQTT
Document code: MN67948_ENG Revision 1.000 Page 20 of 30
Figure 3d: “Set Communication  TLS” window
Figure 3e: “Set Communication  NTP” window
Figure 3c: “Set Communication  Serial” window
S
ERIAL
:
This section is used to define the parameters of Serial line. The means of the fields are:
In the field “ Baudrate ” the baudrate for the serial line is defined;
In the field “ Parity ” the parity of the serial line is defined;
In the field “ Stop Bits ” the number of Stop Bits of the serial line is defined.
T
LS
:
This section is used to define the parameters of TLS protocol. The means of the fields
are:
If the field “ Enable TLS ” is checked, the TLS protocol for secure connection is
enabled;
If the field “ Server Authentication ” is checked, the authentication of the Server
using TLS is enabled. If enabled, in the field “ Server Certificate ” the certificate
from the Server is defined;
If the field “ Client Authentication ” is checked, the authentication of the Client
using TLS is enabled. If enabled:
o
in the field “
Client Certificate
” the certificate from the Client is defined;
o
in the field “Client Key” the private key of the Client is defined;
o
in the field “Client Key Password” the password for the private key of the
Client is defined.
NTP
(N
ETWORK
T
IME
P
ROTOCOL
):
This section is used to define the parameters of NTP protocol. The means of the fields
are:
In the field “ Server URL ” the URL or the IP Address of the NTP Server is
defined;
In the field “ Poll Time (seconds) ” the polling time for the time
synchronization is defined.