Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
DALI / MQTT
Document code: MN67941_ENG Revision 1.100 Page 34 of 45
NETWORK SETTING:
By pressing the
button in the Network view, it is possible to
read the converter and check the DALI devices/sensors
discovered, the groups set and the scenes configured.
By selecting the single DALI devices found, the single groups, the
single scene or the entire DALI network, it is possible to manage
and test the functioning of the network.
D
EVICES
:
The means of the fields for “DEVICE INFO” are:
In the field “
Device Type
” the type of DALI device is
printed;
In the field “
Software version
” the software version of
the DALI device is printed;
In the fields “
Power Range
” Min value, Actual value, Max
value, System Fail value, Power On value, Fade Time and
Fade Rate of the DALI device is defined. It is possible to
read the actual value and set a new value;
In the fields “
DEVICE STATUS
” the actual status of the
DALI device is printed;
In the field “
SET NEW ADDRESS
” it is possible to
program a new ID to the DALI node;
In the field “
REMOVE ADDRESS
” it is possible to delete
the ID from the DALI node.
Figure 11: “Device settings” window