ADF Web HD67941-B2-N, User Manual, Page: 25 / 45

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual DALI / MQTT
Document code: MN67941_ENG Revision 1.100 Page 25 of 45
S
ET
A
CCESS
The “ Set Access ” section (Fig. 5b) is used to list the DALI sensors to read and the DALI commands to send to the DALI ballasts. The means
of the fields are:
If the field “ Enable ” is checked, the DALI device/sensor is enabled;
In the field “ Dev/Sen ” the DALI node is defined;
In the field “
Type
” the type of DALI node to read/write is defined;
In the field “ Ch. Number ” the ID of the DALI node is defined;
In the field “ Instance ” the instance of the DALI node is defined;
In the field “ Command ” the command code to send is defined. If not used, this column can be set to ‘0’;
In the field “ Time Send ” the delay in ms between the commands is defined. If not used, this column can be set to ‘0’;
In the field “ Timeout ” the timeout in ms for the reception of the response is defined. If not used, this column can be set to ‘0’;
In the field “ Function ” the DALI function to recall is define. This feature is used to control DALI ballasts automatically from a DALI 2
device as a DALI router;
In the field “ Position ” the byte of the internal memory array where mapping the data is defined;
In the field “ Num Bytes ” the dimension of the data is defined;
In the field “ Mnemonic ” a description of the row is defined.
Figure 5b: “Set Access” window