Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DMX / EtherNet/IP - Converter
Document code: MN674-A026_ENG Revision 1.000 Page 16 of 30
Page 16 of 30
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, DMX and EtherNet/IP.
By Pressing the “
Set Communication
” button from the main window of SW674-A026 (Fig. 2) the
window “Set Communication” appears (Fig. 3).
The meaning of the fields of “EtherNet/IP” are:
In the field “
IP ADDRESS
” the IP address of the EtherNet/IP side of the converter is defined;
In the field “
SUBNET
Mask
” the SubNet Mask of the EtherNet/IP side of the converter is
defined;
In the field “
GATEWAY
” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “
Port
” the port used for EtherNet/IP communication is defined (fixed to ‘44818’).
The means of the fields for the “DMX” section are:
In the field “
DMX
” it is possible to define if the converter will act as DMX controller (“OUT”) or
as DMX device (“IN”);
In the field “
Channel Number
” the number of channels of the DMX side is defined (up to 496
channels);
In the field “
Channel Start
” the starting DMX channel to/from which mapping/taking the
EtherNet/IP data is defined.
Figure 3: “Set Communication” window
