Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DeviceNet Master / PROFIBUS Slave
Document code: MN67555_ENG Revision 1.003 Page 13 of 20
SET COMMUNICATION:
This section defines the fundamental communication parameter of two buses, DeviceNet bus and
PROFIBUS.
By Pressing the “
Set Communication
” button from the main window for SW67555 (Fig. 2) the window
"Set Communication" appears (Fig. 3).
The window is divided in two sections, one for the PROFIBUS and the other for the DeviceNet.
The means of the fields for “PROFIBUS” are:
In the field “
ID Dev.
” the address for the PROFIBUS side is defined;
In the field "
N Byte IN
" the number of byte from the slave PROFIBUS to the converter is defined (at
maximum it is possible to use 244 byte);
In the field "
N Byte OUT
" the number of byte from the converter to the slave PROFIBUS is defined
(at maximum it is possible to use 244 byte).
The means of the fields for “DeviceNet Master” are:
In the field “
ID Dev.
” the address for the DeviceNet Master is defined;
In the field “
Baud Rate
” the velocity of the DeviceNet bus is defined.
Figure 3: “Set Communication”
window
