LoRaWAN Demonstrator (Provider) - User guide version V1.2
page : 11 / 24
3
Charging the demonstrator
The product contains a rechargeable battery. Upon connecting it to a computer via a mini-USB cable, it will automatically begin
charging; even if the ON/OFF switch is on the OFF position (this behavior is similar to the one of mobile phones). The product
c
an still be used while it’s charging.
During the charging process, the charge state indicator is steady
red
. When charging is completed, the charge state indicator
becomes steady
green
.
Figure 2: Product during charge
Figure 3: Product when charge is completed
If the battery is completely discharged,
it will need 8 hours
of charging time to get back to full charge.