LoRaWAN Demonstrator (Provider) - User guide version V1.2
page : 10 / 24
2
Device overview
The LoRaWAN demonstrator by Adeunis RF is a LoRaWAN CLASS A v1.0 compliant device. It is NOT a point to point device
and cannot be operated in such a way. It is meant to be paired to an operated network.
2.1
Form factor
The device takes the shape of a remote control with embedded GPS, accelerometer and temperature sensor.
Figure 1: Demonstrator physical description
2.2
Technical specifications
Technical specifications
Communication
LoRaWAN protocol & LoRa Modulation
Module configuration
Through AT commands
Radio data rate
Variable (SF12 - 183 bps to FSK 50 kbps)
UART configuration
115.2 kbps/N/8/1
UART port
Available through USB connector
Frequency channels
ISM band 863-870MHz
RF output power
14dBm (25mW)
Sensitivity
down to -140 dBm in SF12/CR4
Operating range (open space)
Up to 15km
Operating temperature
-40°C / +85°C
Dimensions
180 x 61 x 19 mm
Standard compliance
EN 300-220, EN 301-489, EN 60950
LED 1&2
Buttons 1&2