Adesys SVL Series Manual Download Page 3

Page 3

Manual SVL 4G Weblogger 

Adesys B.V. | Wateringen

1 Introduction

This manual covers the SVL module equipped with firmware version 1.0 and higher. The SVL is an alarm 

dialer and can be used to monitor processes and report alarms via SMS and E-mail.

1.1  Variants

The SVL is available in multiple variants:

•  The SVL with universal inputs and an output open collector;

•  The SVL with universal inputs, output open collector and a relay output;

•  The SVL with universal inputs, output open collector and a PT100 2-wire or 3-wire temperature sensor;

•  The SVL with contact inputs and a PT100 2-wire or 3-wire temperature sensor.

1.2  Features of the SVL-series

•  Checkmyproces.com.

• 

Configurable delay times.

•  Reporting of power failure.

• 

Periodic restart (reset) of the SVL (can be switched on and off).

•  Ethernet interface UTP connection.

• 

Settings and SMS texts are permanently stored in the internal flash memory of the SVL.

We recommend that you read the user manual carefully so that you can make optimal use of all SVL 

options.

1.3  Safety criteria 

Before using the SVL, there are several criteria that the user should meet:

• 

The SVL should be installed in a controlled environment (for reasons of fire prevention);

•  The SVL should be supplied with power using a SELV-type power supply;

• 

External Ethernet should not be connected directly to an SVL, but should be connected via an 

overvoltage protection device;

•  To reduce the probability of damage to the equipment, the SVL should be placed in an environment 

protected against electrostatic discharge (ESD);

•  The SVL is intended for use as a modem or alarm dialer. The SVL is not intended for use as part of a 

critical safety system in a critical process.

1.4  Checking the delivery

Check the packaging for damage. Contact your supplier immediately if the delivery is found to be 

damaged or incomplete upon receipt.

The standard delivery includes:

•  SVL module;

•  Connection terminals;

•  Ethernet cable;

•  Quickstart SV-line.

Optional items include:

•  Antenna and antenna cable (various models, including vandalism-proof antennas);

•  Mains adapter 230 Vac/12 Vdc (item number SV-20).

1.5 Environment

This product contains materials that can harm the environment. For the sake of the environment, if the 

product has to be replaced at the end of its service life please do not dispose of it through the household 

waste. Please return the device to your supplier or hand it over to a designated depot.

1.6  Warranty and repair

Adésys performs a series of extensive tests on each SVL before dispatch. ADÉSYS uses a warranty period 

of 

1 year

.

Warranty claims are invalidated if

:

• 

The defect is caused by gross negligence or inexpert installation;

• 

The device has been opened and/or repairs or modifications have been performed without the 

permission of adésys;

•  It is found that the serial number has been removed or damaged.

Please get in touch with Adésys customer service if you have any questions regarding the warranty or 

repairs.

Summary of Contents for SVL Series















Reviews: