background image

1

5

2

6

10

3

7

11

9

4

8

12

Model: EZScan 1000

Processor: PC: IBM Compatible PC with Pentium III or higher 

                  Mac: PPC G4, PPC G5 Intel

Memory:    512 MB RAM and 500 MB Free HDD Space

Operating System: Windows

®

 7, Windows

®

 Vista, Windows

®

 XP & Windows

®

 2000

                               Mac

®

 10.4, 10.5 & 10.6   

Connectivity Interface: USB 2.0 Port

Others: High Color Graphic Card (VGA or higher)

             CD-ROM Drive (for Software Installation)

SPECIFICATIONS

Scanning Type: Image Capture CMOS

Optical Resolution: 1800 DPI

Software Interpolation: 3600 DPI x 3600 DPI (5-Megapixels)

Color Depth: 24 bit/pixel

Preview/ Scan Speed: Approx 8 sec (600 DPI)

Action Button: Transparent & Negative Scan

Scan Method: Single Pass

Protocols: TWAIN Compliant

Interface: USB 2.0 Only

CONTENTS

Using Mounted Slide Holder

To scan 35mm 

mounted slides

 (max 4 slides):

Insert mounted slides into slots with emulsion (non-glossy) side down. 

There are arrows and illustrations on the frame of each slot. Please 

follow illustrations to insert mounted slides.

Using Filmstrip Holder

To scan 35mm 

filmstrips

 (max 6 frames):

Open filmstrip holder and place filmstrip in the film holder with emulsion,

(non-glossy) side down. Then snap the film holder cover closed.

Insert Film Holder into Scanner

Insert the film holder into the scanner through dust cover slots. The film 

holder can be inserted from either side. The film holder will index at each

frame using the notches on its side rails. 

1. To ensure film is scanned properly, verify that your slide/film holder is 

    inserted correctly (see page 9).

2.

 

The film holder should be inserted into the scanner smoothly. Do not push 

    the film holder hard or use extreme force, this will damage scanner.

3. When film holder is inserted into scanner it will stop at index positions, 

    before preforming scan gently push and pull the film holder to make sure

    the film holder has correctly landed in an index position.

   

Attention

Before performing the driver/software installation ensure your 

scanner is 

NOT CONNECTED

 to your computer.

1. Insert the Software CD into your CD-ROM drive.

Note: If the Installation Wizard does not start or display automatically, 

please double click “

install.exe

” from the root of CD-ROM.

2. When the Installation Wizard window is displayed click on “

Install 

    the Software

” button.

3. Next, click on the “

Install

” button to start the installation.

4. Then click on the “

Next

” button in the window that appears.

5. If there is a message asking you to install device software, click the 

    “

Install

” button.

6. Click “

Install this driver and software anyway

” (Windows 7 or Vista) or

    “

Continue Anyway

” (Windows XP or 2000) when Windows

®

 message is

    displayed during the installation process.

7. Next a window will be displayed asking you to connect scanner. Plug the 

    smaller end of the included mini USB cable to the back of the scanner and

    plug the bigger end of the USB cable to the USB port on your computer.

8. When your computer recognizes scanner, return to the orignal window

    that asked you to connect scanner and click 

“OK”

.

9. Click “

Finish

” to complete the driver installation.

 

10. Restart your computer after the installation is completed. 

With the Adesso Film Scanner quickly and easily convert old filmstrips and slides to 
digital images for instant sharing or digital storage.  This film scanner conveniently 
connects to your computer via USB connection and is USB bus powered, meaning no 
additional power supply cable is needed, the same USB connection to your computer 
powers the digital film scanner.  The Adesso Film Scanner is  extremely user-friendly, 
just press the one-touch button and film photographs are instantly scanned and on 
your computer screen in high quality 1800 DPI images. The Adesso Film Scanner is 
also  lightweight  and  portable  so  you  can  use  anywhere.  Sharing  your  film  photo-
graphs digitally is only a click away, start enjoying with family and friends today!

 

A

(1) Adesso 

EZScan 1000 

Film Scanner

B

(1) Filmstrip Holder

C

(1) Slide Holder

D

Mini USB Cable

E

Quick Start Guide

F

Software CD

Quick

Guide

English

Scanner User Interface

1. 

LED Indicator:

 Indicates the scanner status.

    On: The scanner is connected with the computer and ready for 

           film scanning.

    Off: The scanner is off, either because scanner is disconnected

           from computer or because the computer is turned off.

2. 

Transparency or Negative Scan Button:

 A simple touch on the 

    scanner Transparency or Negative Scan Buttons enables you to 

    conveniently scan the slide or filmstrip on holder, and automatically 

    save the digital image file on your computer.

3. 

Dust Cover Slot: 

Insert the film holder into the scanner through dust

    cover slot. The film holder can be inserted from either side. The film 

    holder will index at each frame using the notches on its side rails.

LED Indicator

Dust Cover Slot

Transparency Scan Button

Negative Scan Button

EZScan 1000

Film Scanner

FotoLite Setting (Optional)

1. Double click on the FotoLite icon located on the Windows system tray 

    or right click the FotoLite icon         and select “

Properties

”.

Note: If the FotoLite icon is not in your Windows system tray, go to your

          computer’s START menu, then Programs, find EZScan 1000 

          folder and select FotoLite software.

2. The FotoLite Setting window

    will appear. You can apply

    customized settings of your

    choice or leave default.

    

    

3. Click 

“Done”

 when complete

    or 

“Default”

 to return settings

    to original default settings.

    

    

Converting Film to Digital Files

1. Press either Transparency or Negative scan button on the EZScan

    1000 and the FotoLite screen will be displayed as seen below.

    Note: FotoLite software must be active and showing in Windows

®

 tray so

             buttons will launch scanning software (to open software please see 

             page 11).

 

 

scan          preview

2. Click “

Preview

” icon to see image on screen, then once selection area 

    is set click “

Scan

” icon.

 

The scanned image(s) will be saved in the 

    “

Destination Folder

” selected under “Preference Settings” of FotoLite.

Attention

Before scanning read instructions below for best results.

• Always turn the film emulsion (non-glossy) side 

facing towards the front 

  of scanner and glossy side facing the back of the scanner (where USB 

  cord is located).

 On slide/filmstrip holder edge you can see ‘Mounted Slide Holder’ or 

  ‘Filmstrip Holder’ text, always keep this side facing towards the back of the 

  scanner (where USB cord located).

• On slide/filmstrip holder edge there is a small label with slide/filmstrip

  holder inserting instructions, this label should always face towards 

  front of scanner.

Attention

Label

Reviews: