Ademco Vista 128 Quick Guide
https://alpha.adt.com/help/164[11/13/2018 7:46:41 PM]
User
Authority
Code
Explanation
Code
Level 1
Master
Can perform all system functions in assigned partitions and can add, delete or change
Manager and Operator level users. Master codes can only be added by the Installer.
[1]
Level 2
Manager
Can perform system functions in assigned partitions and can add, delete or change
Operator level users.
[2]
Level 3
Operator
A
Can perform system functions in assigned partitions but cannot add or delete other
users.
[3]
Level 4
Operator
B
Same as Operator A, except Operator B cannot bypass zones of protection.
[4]
Level 5
Operator
C
Can arm the system in assigned partitions but cannot disarm the system unless the
system was armed with this code. This code is typically assigned to a trusted person
who may need to arm/disarm the system at certain times, i.e., a babysitter.
[5]
Level 6
Duress
Using this code to arm or disarm the system will send a silent panic alarm to the central
monitoring station, if that service is connected.
[6]
For more information on user access codes, please view the
Trouble Conditions
Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key
will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your
attention. Check the specified zone area, close any open doors or windows and enter your security code
and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some
change in the environment of the protected area.
To silence trouble beeps, press any key or enter your security code and press [OFF].
For a complete list of Trouble Conditions, please refer to the
page.
Volume
You can adjust the beep volume on your Ademco Vista 128.
To
increase
the volume, press [#] + [0] + [2] + [3].
To
decrease
the volume, press [#] + [0] + [2] + [6].
