Ademco Vista 128 Quick Guide
https://alpha.adt.com/help/164[11/13/2018 7:46:41 PM]
For more information on this topic please visit the complete
.
Battery
The Ademco Vista 128 operates on a
.
Loss of AC power and use of backup battery power is indicated by
NO AC
.
A low battery condition is indicated by
BAT.
For instructions on replacing your battery, please visit our
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, enter your [security code] + [BYPASS] + [3-digit zone number].
To unbypass a zone, enter your [security code] + [OFF].
For more information on this topic please visit the complete
.
Change Date and Time
To change the date and time:
Enter your [Master code] + [FUNCTION] + [6] + [3].
Use the [*] key to move the cursor to set the month, hour, minute, date and year.
Press any key from 0-9 to toggle from AM to PM.
To exit, press [*] when the cursor is in the year position.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn chime mode
on and off
, enter your [security code] + [CHIME].
Toggle between On, to turn the chime mode on, and Off, to turn the chime mode off.
For more information on this topic, please visit the complete
.
Reset
To clear the display after an alarm event, enter your [security code] + [OFF] to clear the alarm event
history.
