Pa
ge
12
-
Ch
ap
te
r:
S
ta
nd
ar
d
an
d
C
er
tif
ica
tio
ns
11 STANDARD AND CERTIFICATIONS
11.1.1 Electrical Safety for Mounting:
Device assembling: UL508, IEC/EN 60950 (VDE 0805) and EN 50178 (VDE 0160). Installation according:
IEC/EN 60950. Input / Output separation: SELV EN 60950-1 and PELV EN 60204-1. Double or reinforced
insulation. Safety of Electrical Equipment Machines: EN 60204-1.
In According to EMC 2014/30/UE and Low voltage directive 2014/35/UE
11.1.2 Safety Standards:
EN IEC 62368-1: 2014/AC:2015
11.1.3 EMC Standards Immunity:
EN 61000-4-2, EN 61000-4-3, EN 61000-6-2, EN 61000-4-4, EN 61000-4-5.
11.1.4 EMC Standards Emission:
EN 61000-6-4, EN 61000-6-3, EN 61000-3-2 (see data sheet for each device)
11.1.5 Conformity to:
EN60950/UL60950-1 and CSA C22.2 No. 60950-1-07 (Information Technology Equipment) – Safety –
Part1: General Requirement.
Device is intended to be installed in a cabinet protected from external shocks or damages.
Electrical safety EN54-4 Fire Detection and fire alarm systems
DIN41772: Charging curve; DIN41773: Characteristic Curve for charging Lead Acid and Nickel-Cadmium
batteries.
11.1.6 Approved:
Devices, CBI243A, CBI245A, CBI123A, CBI126A, CBI1210A,CBI2410A and\S, CBI485A and \S,
CBI1235A, CBI2420A, CBI4810A
EN60950 / UL60950-1 and CSA C22.2 No. 60950-1-07 (Information Technology Equipment) – Safety –
Part1: General Requirement.
12 RAIL MOUNTING:
All modules must have a minimum vertical and horizontal distance of 10 cm to this power
supply in order to guarantee sufficient auto convection. Depending on the ambient
temperature and load of the device, the temperature of the housing can become very high.
