A
A
D
D
E
E
L
L
s
s
y
y
s
s
t
t
e
e
m
m
Instruction Manual
ADEL system srl
Via F. Bacone 13/E, 42029 Masone RE (Italy) – Tel. ++39-0522-345518
Fax. ++39-0522-345551 – Internet: www.adelsystem.com
CB245A_R0 120W Eng.doc
CB245ARJ
Intelligent Battery Charger
Thank you for having chosen one of our products for your work. We are certain that it will give the utmost satisfaction and be a notable
help on the job.
General Description:
Application
CBI battery charger is a range of microprocessor-power supplies witch correctly charge sealed lead-acid batteries at all time
maximizing performance and life span.
Charge the battery in multi-stage principle, Fast and Trickle and automatically the device, check the battery efficiency in a lifetime to
prevent any risk of damage to the battery and allow leaving the charger permanently connected. Before begin the operations of
installation consult the manual.
Mains Characteristic
•
Nominal Input Voltage: 115 - 230 Vac
•
OUTPUT 1: for connection to Battery
•
OUTPUT 2: not present
•
Fast and trickle battery charge In according to DIN 41773
•
Signaling: replace battery, low battery, mains or buffering
•
Overload and short circuit protections
•
Safety isolation in according with EN 60950
•
Degree of protection IP20
•
Rail DIN mounting
Vac Input
Mains or
Backup
OUTPUT N°2
Not present
Charging Level
OUTPUT N°1
Battery module
Low Battery or
Battery replacement
Battery Type
Configuration Jumper
Monitor Led
Auxiliary
Output
(CBXXX/ARJ)
