Additel ADT685, User Manual

Page: 24 / 63

16
(4) PType: Switch between gauge pressure and absolute pressure. When switching to absolute pressure, the ABS
icon will be displayed on the status bar. If the pressure gauge does not support gauge/absolute pressure mode
switching, the PType menu will be hidden.
(5) Leak: Enter the pressure leak test interface, see chapter 2.6.
(6) REC: Enter the pressure record interface, see chapter 2.7.
(7) Lock: Lock/Unlock the touch screen.
(8) Time: Enter the date and time editing interface.
(9) Peak: Enter the pressure peak record interface, see chapter 2.5.
(10) Light: Turn on or off the backlight, long press to enter the backlight time setting.
2. Status Bar: Including USB status, Bluetooth, battery, DIFF, absolute pressure and filtering status icons.
The Bluetooth icon can be clicked to turn on or off Bluetooth function.
3. Units and prompt information display area: Display engineering units, click this area to switch the pressure unit.
4. Main display area: Display pressure values, long press to enter the pressure resolution editing interface.
5. Sub display area: Display atmospheric pressure/temperature, tare value or Alarm upper and lower limits. When all
three functions are enabled, clicking the main display area will switch to display one of the messages in a loop. If all
the three functions are not enabled, the sub display area is empty.
6. Zero button: Zeroing the gauge under gauge pressure mode. In the absolute pressure mode, the Zero button will be
hidden.
2.3 Buttons
Power ON/OFF Button: Long press 3 seconds to power on/off the gauge. In the data input state, it could delete
the inputted data. In the menu state, it has the function of returning to the previous menu.