Additel 762, User Manual

Page: 80 / 139

62
Table 16 Network connection

When the DHCP mode is selected, the content of the table below will be allocated by the system automatically
and are read-only items.

When the static mode is selected, the following table needs to be completed manually.
Table 17 Static mode selection

The port number and physical address are factory settings and cannot be modified.

Click the button at the lower right corner of screen confirms and saves the settings.
4.2.2 Wireless communication
The calibrator is connected via a wireless network.
Subject Valid value Description
Address acquisition
DHCP/Static Select the acquisition mode of device address.
Subject Valid value Description
I/P address
0.0.0.0~255.255.255.255
Set the IP address of calibrator host.
Subnet mask 0.0.0.0~255.255.255.255
Set the subnet mask of calibrator host.
Gateway 0.0.0.0~255.255.255.255
Set the source gateway of calibrator host.