73
4.5.2 Maintenance
Maintenance needs inputting a password. The factory default password is: 123456
Maintenance is used to record the maintenance records, calibration records, and system board upgrade
information of the device; and can also execute operation to clear system records.
Maintenance records: Users can add the maintenance personnel, date, content and brief information, which is
displayed in the form of list.
Calibration records: Record related information of each calibration, including the calibration item, calibration
time, and detailed calibration data. Users can search and browse it by date and time.
4.5.3 Factory reset
Factory reset requires a password. The factory default password is: 123456. After reset, data clearing is irreversable.
Please carefully use this function.
Restores the user settings to defaults, and clear snapshot and task files.
Inputs the password to enter the factory reset interface. A prompt box will pop up to ask whether you confirm it.
Click "OK" or press the
key to immediately execute the reset operation. Click "Cancel" or press the
key to
cancel operation.
Factory reset will not restore system calibration data. If you need to restore the system calibration data, please
refer to Section 3.7 "System calibration".
After factory reset and reboot, users need to set the date/time. See Section 4.6.1.
Summary of Contents for 761A
