Additel 273E Series, Manual

Page: 32 / 56

22
Table 5 Filter configurations
3.1.7 Scaling
The scaling function gives the calibrator the ability to convert electrical measurement signals into other signals. Click
the menu button of the measurement channel, select the scaling menu item in the pop-up menu, and the parameter
configurations related to scaling will be displayed (see Figure 9).
Table 6 Scaling Configurations
Subject
Valid Value Description
Enable/disable Enable/disable Enable or disable the filter function
Method first-order linear filter or moving average filter Filtering method
Filter coefficient 0 ~ 1
Only available when the first-order
linear filter is selected
Number of samples 1~50
Only available when the moving
average filter is selected
Subject Valid Value Description
Enable/disable Enable/disable Enable or disable the scaling function
Input range Number Range before scaling
Output range Number Range after scaling
Resolution 0~0.000001
The number of decimal places displayed after
scaling
Transfer function Linear, square or square root Scaling transfer function