manualshive.com logo in svg

Addi-Data APCIe-7300, Technical Description

Share
Download
Addi-Data APCIe-7300 Technical Description Download Page 11

Insertion and installation of the board  

APCIe-7xx0

 

3

 

Insertion and installation of the board 

3.1

 

Insertion of the APCIe board  

 

Risk of injury! 
Please follow the safety precautions! An improper handling of the 
board may cause property damage and injury. 

 

3.1.1

 

Opening the PC 

 

Switch off the PC and all the units connected to it. 

 

Pull the PC mains plug from the socket. 

 

Open the PC as described in the manual of the PC manufacturer. 

 

3.1.2

 

Selecting a slot 

 

Select a free 1-lane (x1), 4-lane (x4), 8-lane (x8) or 16-lane (x16) PCI Express slot for the board. 

Fig. 3-1:  PCI Express slot types 

 

 

 

Unscrew the back cover from the selected slot. For this, follow the operating instructions provided 
by the PC manufacturer! 
Keep the back cover in a safe place. You will need it if you remove the board. 

 

Provide for potential equalisation. 

 

Take the board out of its protective packaging. 

www.addi-data.com 11 

 

 

Summary of Contents for APCIe-7300













































Reviews:

No comments

Brands by name

Popular brands

Load more brands