Addi-Data ADDINUM APCI-1500 Technical Description Download Page 44

Page: 44 / 117

Technical description Chapter 8

APCI-/CPCI-1500

Input frequencies

The input frequency for the timer is selected through the software function
i_APCI1500_InitTimerInputClock (...)

Available frequencies:
111.86 kHz

100 ppm,

3.49 kHz

100 ppm,

1.747 kHz

100 ppm.

IMPORTANT!

The timer component internally operates with half of the input frequency.

Data

Approximate watchdog times:

Input frequency

17.9 µs

1175 ms

111.86 kHz

574 µs

37.65 s

3.49 kHz

1.14 ms

74.9 s

1.747 kHz

Option (only implemented for the APCI-1500)

The counter input channels 1, 2 and 3 can be equipped with fast optical couplers.
The maximum input frequency is then 140 kHz. (Standard frequency: 10 kHz)

Summary of Contents for ADDINUM APCI-1500






















































































































Search results

Summary of Contents for ADDINUM APCI-1500

Reviews:

Related manuals for ADDINUM APCI-1500

Brands by name

Popular brands

Addi-Data ADDINUM APCI-1500, Technical Description

Search results

Summary of Contents for ADDINUM APCI-1500

Reviews:

Related manuals for ADDINUM APCI-1500

Brands by name

Popular brands