Addi-Data ADDINUM APCI-1500 Technical Description Download

Page: 34 / 117

Technical description Chapter 6

APCI-/CPCI-1500

Uninstall ADDIREG

•

Click on "Deinstall registration for AddiReg".

Proceed as indicated until the complete removal of ADDIREG. The ADDIREG
entries in the Windows registry are deleted.
Removing the ADDIREG program
The ADDI_UNINSTALL program is delivered on the CD-ROM.

•

Install the ADDI_UNINSTALL program on your computer.

•

Start the ADDIREG program and click on "Deinstall registration"

•

Quit ADDIREG

•

Start the ADDI_UNINSTALL program

•

Proceed as indicated until the complete removing of ADDIREG.

You can also download the program from the Internet.

6.5

Software downloads from the Internet

You can download the latest version of the device driver for the APCI-/CPCI-1500
board.

http://www.addi-data.de. or

http://www.addi-data.com

If you have any questions, do not hesitate to send us an e-mail to
[email protected]

[email protected]

Summary of Contents for ADDINUM APCI-1500






















































































































Search results

Summary of Contents for ADDINUM APCI-1500

Reviews:

Related manuals for ADDINUM APCI-1500

Brands by name

Popular brands

Addi-Data ADDINUM APCI-1500, Technical Description

Search results

Summary of Contents for ADDINUM APCI-1500

Reviews:

Related manuals for ADDINUM APCI-1500

Brands by name

Popular brands