Addi-Data ADDINUM APCI-1500 Technical Description Download

Page: 33 / 117

APCI-/CPCI-1500 Technical

description Chapter 6

6.4

The ADDI-UNINSTALL program

6.4.1

Installation of ADDI-UNINSTALL

The ADDI-UNINSTALL program is delivered on the CD-ROM.

- Change to the CD drive and start the set-up file under
ADDIUNINSTALL/Disk1 (double click).

Fig. 6-8: Installation of the ADDI-UNINSTALL program

- Proceed as indicated on the screen.

6.4.2

Software uninstalling with ADDI-UNINSTALL

•

Start the ADDI-UNINSTALL program.

Fig. 6-9: The ADDI-UNINSTALL program

•

Select the software or the driver to be deinstalled. Click within the
corresponding check box.

•

Click on "Remove". Proceed as indicated until the complete removal of the
program.

Summary of Contents for ADDINUM APCI-1500






















































































































Search results

Summary of Contents for ADDINUM APCI-1500

Reviews:

Related manuals for ADDINUM APCI-1500

Brands by name

Popular brands

Addi-Data ADDINUM APCI-1500, Technical Description

Search results

Summary of Contents for ADDINUM APCI-1500

Reviews:

Related manuals for ADDINUM APCI-1500

Brands by name

Popular brands