Technical description Chapter 5
PA 7300
17
Fig. 5-6: ADDIREG registration program
Screen explanation:
Table:
The table in the middle lists the registrated boards and their respective
parameters.
Board name:
Names of the different registrated boards (eg.: APCI-3120).
When you start the program for the first time, no board is registrated in this table.
Base address:
Selected base address of the board.
IMPORTANT!
The base address selected with the ADDIREG program must correspond
to the one set through DIP-switches.
Access:
Selection of the access mode for the ADDI-DATA digital boards.
Access in 8-bit or 16-bit.
PCI bus / slot:
Used PCI slot. If the board is no PCI board, the message "NO" is displayed.
Interrupt:
Used interrupt of the board. If the board uses no interrupt, the message "Not
available" is displayed.
IMPORTANT!
The interrupt selected with the ADDIREG program must correspond to
the one set through DIP-switches.
