Technical description Chapter 5
PA 7300
15
5.3.3 Storing the configuration
You store the configuration with the option
Save
or
Save as
from the
File
Menu. You can create several configuration files
5.3.4 Define the "boot file" (initialization file)
You define the configuration file you have stored before as a "boot file"
(command
Set Boot file
from Menu
Option
).
Thus when the PC will be rebooted:
- the configuration file will be called up automatically in the batch file
AUTOEXEC.BAT.
- and the board will be configured in accordance with the configuration file
which has been defined as the boot file.
You enter the path of the boot file with the command
Set environment
.
In the left corner below appears the name of the boot file.
Batch file AUTOEXEC.BAT
You type ADDISET in file AUTOEXEC.BAT as follows:
ADDISET /I
With this call the board will be configured in accordance with the configuration
file which has been defined as the boot file.
IMPORTANT!
File AUTOEXEC.BAT:
Make sure to type the ADDISET command at
the
beginning
of the batch file.
