manualshive.com logo in svg

ADDER View Matrix AVM208, Installation And Use Manual, Page: 24 / 71

Share
Download
ADDER View Matrix AVM208 Installation And Use Manual Download Page 24

AdderView MATRIX

Installation and Use

Page 22

Type of mouse / system  Driver type

Likely expected 

Suggested

Connected at bootup

data format

restoration

PS/2

PS/2 only

PS/2

Standard

PS/2

IntelliMouse

PS/2

Standard

IntelliMouse / AdderView

PS/2 only

PS/2

Standard

IntelliMouse / AdderView

IntelliMouse

IntelliMouse

IntelliMouse

To restore lost mouse movement on a CPU connected to the AdderView:

1)

 

Select the CPU that has lost its mouse movement

2)

 

Activate the on-screen menu using the keyboard hotkeys

3)

 

Press F1 to view additional menus

4)

 

Select the FUNCTIONS menu

5)

 

Select RESTORE STANDARD MOUSE or RESTORE INTELLIMOUSE

6)

 

Exit the on-screen menu

2.10 Connecting an AdderLink Extender

You may connect external AdderLink extenders (i.e. an XR / XL receiver /
transmitter pair) to the AdderView's KVM connectors. If you do this then you should
power the AdderLink XL units using their optional power adapter.

AdderLink requirements

Your AdderLink Extender unit will need to be fitted with firmware version 1.08 or
higher if it is a Gold model or 2.08 or higher if it is a non-Gold model.  If you have an
earlier AdderLink unit please contact Adder technical support for advice.

Summary of Contents for View Matrix AVM208








































































Reviews:

No comments