AdderView
Installation and Use
Page 26
4. AdderView configuration options
All the options described in this section are entered in AdderView configure mode -
see section 2.6 for instructions on entering configure mode.
4.1 Screen saver time delay
AdderView contains a programmable screen saver which will blank the display after
the set time delay with no keyboard or mouse activity. Simply typing at the keyboard
or moving the mouse will re-enable the display. The display will flash whilst the
AdderView is in screen save mode.
B1
- screen saver disabled (default)
B2 - Blank screen after 1 minute of inactivity
B3 - Blank screen after 2 minutes of inactivity
B4 - Blank screen after 4 minutes of inactivity
B5 - Blank screen after 8 minutes of inactivity
B6 - Blank screen after 12 minutes of inactivity
B7 - Blank screen after 16 minutes of inactivity
B8 - Blank screen after 20 minutes of inactivity
4.2 Autoscan ‘lock on’ mode and delay time
AdderView can be set to select each channel in turn for a period of time set by the
Autoscan delay time. Autoscan mode is entered by typing the hotkey keys together
with ‘A’. By default, only those channels which have a powered up computer
connected to them will be scanned. Sometimes it may be desirable to scan all
channels, even if the attached computer is switched off (this will simply show a blank
screen when it is selected). All the AdderView’s ports will be scanned if option L2 is
selected. Some applications may also require the AdderView to power on in
autoscan mode. This feature can be selected using the L3 or L4 options.
