ADDERVIEW PRO
Configuration Menu
Functions
Global Preferences
Setup Options
Edit Computer List
EDID Options
Enter–Select
Esc–Quit
Firmware version: 1.02
Configuration
Configuration menus
The configuration menus allow you to determine numerous aspects of the
AdderView Pro 8 DVI capabilities.
To access the configuration menu
1 If the main menu is not already displayed, press and hold
and
then press using a keyboard attached to the keyboard USB port of the
AdderView Pro 8 DVI user console.
The selection menu will be displayed:
3 Use the and keys to highlight an option, then press
to select.
2 Press To display the Configuration Menu:
Hotkeys
Note:
and
are the standard hotkeys and can be
to
avoid clashes with other devices or software. If you change the hotkeys,
remember to use the new ones in place of
and
when following
the instructions in this guide.
Configuration menus layout
The menu options are arranged as shown here:
For a description of each option within the Configuration menus, see
for more details.
Configuration Menu
Functions
EDID Options
Global Preferences
Setup Options
Edit Computer List
Reset to Factory Defaults
EDID Source
EDID Refresh
Mouse Switching
OSD Colour
Default Mode
Reminder Banner
Autoscan Mode
Autoscan Period
OSD Dwell Time
Language
Hotkeys
Default Channel
Note: You can also display the main menu by pressing the COMPUTER
button for five seconds.
ADDERVIEW PRO
Computer
Port
Computer 01
01
Computer 02
02
Computer 03
03
Computer 04
04
Computer 05
05
Computer 06
06
Computer 07
07
Computer 08
08
Switching Mode
KVM
SPK
1
1
2
2
F1–More menus
F3–Find
Esc–Quit
Tab–Cycle Mode
Default names for
each computer
channel
Switching mode
bar
Channel numbers
Switching icons show
which peripherals are,
or will be, connected
to which computer(s)
Coloured dots indicate
the status of the
connected computers:
Red: computer off
Green: computer on
Black: computer sleeping
HT
