10
INST
ALLA
TION
Console connections
Console connections (video monitor and/or USB peripherals) are always made at the receiver node, but can also optionally be made at
the transmitter node, if local control (or monitoring) of the computer is required in addition to remote control.
Notes:
•
Video resolutions up to 1920 x 1200 @ 60Hz are supported.
•
HDMI audio is not supported; please use the audio in/out ports to transfer audio signals.
To make console connections
1 Insert the supplied HDMI cable between the HDMI video socket (in the
CONSOLE
section) and the video port on your monitor.
HDMI offers the great advantage that it is a straightforward task to convert its signals to and from other common video formats
(DisplayPort, DVI and VGA) - See page 8.
2 Connect the USB leads from your mouse and keyboard to the two sockets on the rear panel. The single socket on the front panel is
also available (all three USB ports operate in the same manner).
USB
connections
from peripheral
devices
HDMI video
connection to
monitor
CO
CO
NS
O
LE
A
D
D
E
R
L
I
N
K
USB
connections
from peripheral
device
