Arnouse Digital Devices
User Guide
SR20-FDD
Version 1.0
© Arnouse Digital Devices 2022. All rights reserved.
Page 7 of 35
1
Introduction
1.1
Purpose
The purpose of this document is to define the functionality, operation, and maintenance of the
SR20-FDD Data Center. This document serves as the sole reference for the system
functionality at time of delivery. Any change to the Functional Specifications will require
agreement via the change control process between the user and ADDC. The SR20-FDD was
designed to provide long range (up to 24 km) remote operation via fiber optic cable KVM of up
to 20 BioDigitalPC
®
computers.
1.2
Scope
Summarize the purpose and contents of this guide and describe any security or privacy
considerations associated with its use.
This guide has 3 main sections, system functional specifications, operation, and maintenance.
The maintenance section requires that only qualified technicians gain access to the internal
components of the system. The system’s power management controls via the front panel touch
screen or the ROMWare GUI are PIN and password protected for security.
1.3
System Organization
Figure 1 is the block diagram for the SR20-FDD system. The system consists of the following
main components:
• SR10 Module
• AC-DC 12V Power Supply (main power source for SR10 Module and fans)
• DC-DC 12V-5V Converter (power for all KVM modules)
• ROMWARE Lite Module (provides remote power control of each individual PC Card)
• ROMWARE Lite Software (provides touch screen control and/or web GUI remote power
control)
