6247G/6247C DC Voltage Current Source/Monitor Operation Manual
2.3.4 Default Parameters
2-51
2.3.4
Default Parameters
The following table shows the parameters saved in or loaded from the non-volatile memory and their
default values.
Table 2-2 Default Parameter List (1 of 4)
Parameter
Default value
Always saved
Interface
USB
GPIB Address
*2
01
Talk Only/Addressable
Addressable
USB ID
001
Header output
*1
ON
Baud rate
*3
9600
Parity
*3
None
Number of data bits
*3
8 bits
Number of stop bits
*3
1 bit
Parameter loading at power ON
P.OFF
Saved in non-volatile
memory areas 0 to 3
Source function
VS
Parameters for VS
Source value (pulse value) and range
+0.0000 V
HI/LO limit values and range
+320.0 mA/-320.0 mA
Bias value and range
+0.0000 V
Start value and range
+0.0001 V
Stop value and range
+0.0100 V
Step value and range
0.0001 V
Level value and range
+0.0000 V
Sampling count
0001
Start address
0000
Stop address
0000
First value and range
+0.0001 V
Middle value and range
+0.0100 V
Last value and range
+0.0200 V
First step value and range
0.0001 V
Second step value and range
0.0001 V
Source range setting mode FIT/LOCK
FIT
DC pulse base value and range
+0.0000 V
Pulse sweep base value and range
+0.0000 V
*1
Not saved in remote control
*2
6247G
*3
6247C
