6247G/6247C DC Voltage Current Source/Monitor Operation Manual
5.2.9 Calculation Functions
5-51
5.2.9.2
Scaling Calculation
1. Calculation expression
The scaling calculation is defined using the following formula:
2. Operation
•
When the scaling calculation is ON, the MATH indicator goes ON.
•
The set ranges of Constant A, Constant B, and Constant C are 0 to
9.99999+E26 (however,
Constant A
0).
•
If the calculation result exceeds
9. E26, it is scaling-over and the error message
SCL Over is displayed.
•
The scaling calculation is turned OFF by executing the *RST command.
•
Changing the measurement function does not turn OFF this calculation.
Scaling calculation =
Constant A
X-Constant B
Constant C
X: Measurement value