6240B DC Voltage Current Source/Monitor Operation Manual
4.2.6 MENU Key (Parameter Setting)
4-9
Measure SW
Switches measurement ON or OFF.
On:
Executes measurement.
Off:
Does not execute measurement.
Disp Digit
Selects the number of measurement display digits.
Spaces are displayed as blank digits but do not affect any mea-
surement data.
5 digits: Displays measurement data with 5
1
/
2
digits.
4 digits: Displays measurement data with 4
1
/
2
digits.
3 digits: Displays measurement data with 3
1
/
2
digits.
Disp Unit
Selects the output format style for measurement data and compa-
rable upper and lower limit values.
Prefix:
Displays measurement data by using a unit symbol.
Exponent:
Displays measurement data in an exponential form.
Mfunc Link
Links the source function to the measurement function.
On:
The source function is linked to the measurement
function. (VSIM/ISMV)
Off:
The measurement function is unaffected by the source
function.
MEMORY
Sets the measurement data memory-related parameters.
Store Mode
Selects the measurement data memory functions.
The data in the measurement data memory are cleared when the
Store Mode is changed.
Normal: Stores data in the measurement data memory in the
normal mode.
Burst:
Stores data in the measurement data memory in the
burst mode. Used for high-speed measurement.
Off:
Turns OFF the measurement data memory storage
operation.
Mem Recall
Reads out the data stored in the measurement data memory.
The recalled data is displayed on the upper line corresponding to
the recall number on the lower line.
If no measurement data is stored, "No Data" is displayed.
Mem Clear
Clears the measurement data memory.
RANDOM MEM
Sets the source data for random sweep.
Data Set..
Sets data in the random memory.
Pressing the SEL key selects addresses and data.
Save/Clear
Saves or clears the random memory.
Save:
Saves the setting data in the random memory to the
non-volatile memory. The saved data is loaded at power
ON.
Clear:
Clears the setting data in the random memory.
